Evaluation of commercial landscaping mulch for possible contamination from CCA

Wood treated with chromated copper arsenate (CCA) is found in construction and demolition (C&D) debris, and a common use for wood recycled from C&D debris is the production of mulch. Given the high metals concentrations in CCA-treated wood, a small fraction of CCA-treated wood can increase the metal concentrations in the mulch above regulatory thresholds. The objective of this study was to determine the extent of contamination of CCA-treated wood in consumer landscaping mulch and to determine whether visual methods or rapid X-ray fluorescence (XRF) technology can be used to identify suspect mulch. Samples were collected throughout the State of Florida (USA) and evaluated both visually and chemically. Visual analysis focused on documenting wood-chip size distribution, whether the samples were artificially colored, and whether they contained plywood chips which is an indication that the sample was, in part, made from recycled C&D wood. Chemical analysis included measurements of total recoverable metals, leachable metals as per the standardized synthetic precipitation leaching procedure (SPLP), and XRF analysis. Visual identification methods, such as colorant addition or presence of plywood, were found effective to preliminarily screen suspect mulch. XRF analysis was found to be effective for identifying mulch containing higher than 75 mg/kg arsenic. For mulch samples that were not colored and did not contain evidence of C&D wood, none exceeded leachable metal concentrations of 50 microg/L and only 3% exceeded 10 mg/kg for recoverable metals. The majority of the colored mulch made from recycled C&D wood contained from 1% to 5% CCA-treated wood (15% maximum fraction) resulting in leachable metals in excess of 50 microg/L and total recoverable metals in excess of 10 mg/kg. The maximum arsenic concentration measured in the mulch samples evaluated was 230 mg/kg, which was above the Florida residential direct exposure regulatory guideline of 2.1 mg/kg.     

Iron oxide-loaded slag for arsenic removal from aqueous system

An effective adsorbent for arsenic removal from aqueous system was synthesized by loading iron(III) oxide on municipal solid waste incinerator melted slag. The loading was accomplished via chemical processes and thermal coating technique. The key point of the technique was the simultaneous generation of amorphous FeOOH sol and silica sol in-situ and eventually led to the formation of Fe-Si surface complexes which combined the iron oxide with the melted slag tightly. The surface morphology of the iron oxide-loaded slag was examined and the loading mechanisms were discussed in detail. The adsorbent was effective for both arsenate and arsenite removal and its removal capabilities for As(V) and As(III) were 2.5 and 3 times of those of FeOOH, respectively. Both affinity adsorption and chemical reactions contributed to arsenic removal. The effects of solution pH, contact time, arsenic concentration and adsorbent dosage on arsenic removal were examined and the optimum removal conditions were established. Furthermore, leaching of hazardous elements such as Cr(VI), As, Se, Cd and Pb from the adsorbent at a pH range of 2.5-12.5 was below the regulation values. Accordingly, it is believed that the iron oxide-loaded slag developed in this study is environmentally acceptable and industrially applicable for wastewater treatment.     

Formation behavior of PCDD/Fs in PVC pyrolysis with copper oxide

Formation and decomposition behaviors of PCDD/Fs during pyrolysis of polyvinyl chloride (PVC) with CuO have been investigated. These reactions proceed simultaneously, and the rate of decomposition exceeds that of formation with further retention. More 2,3,7,8-TCDD is formed when the dechlorination of PCDD/Fs proceeds significantly. Homologue profile patterns of PCDD/Fs show that the fractions of O8CDD and H6CDFs are relatively larger within PCDDs and PCDFs, respectively. Extremely large amounts of PCDD/Fs are obtained with the long retention time at 200 degrees C. The formation of PCDD/Fs decreases drastically with increase in the molar ratio of CuO/PVC. The acceptability of thermodynamic calculations on the formation of PCDD/Fs is also investigated. The thermodynamic calculated tendency of the effect of oxygen on the formation of PCDD/Fs agrees well with the experimental results, although absolute values of the amount of PCDD/Fs are much different.     

Size and spatial arrangement of home range of checkered snapper <Emphasis Type="Italic">Lutjanus decussatus</Emphasis> (Lutjanidae) in an Okinawan coral reef determined using a portable GPS receiver

Although snappers (Lutjanidae) are commercially important fishery resources in tropical and subtropical waters, their home range size and its spatial arrangement have not been sufficiently clarified. In the present study, the size and spatial arrangement of the home range of the reef-associated checkered snapper Lutjanus decussatus (Lutjanidae) were investigated by use of a portable GPS receiver. In a 120 m × 120 m quadrat established on a section of the fringing reef of Ishigaki Island, 29 individuals of the species were identified by their color pattern and individuals were divided into five arbitrary size classes (class 1 <10 cm TL ≤ class 2 <15 cm TL ≤ class 3 <20 cm TL ≤ class 4 <25 cm TL ≤ class 5). Fish tracking by snorkeling was conducted with the portable GPS receiver. Site fidelity of this species was high. Home range size ranged from 93.0 to 3638.4 m², and there was a significant positive correlation between the home range size and fish total length. Home ranges of the same-sized individuals abutted each other (8.8% area overlap), whereas those of different-sized individuals overlapped (44.0% area overlap). Agonistic behavior (attack and agonistic display) was more frequently found among same-sized individuals (times of agonistic behavior/times of all encounters × 100 = 71.3%), whereas such agonistic behavior was rarely found among different-sized individuals (times of agonistic behavior/times of all encounters × 100 = 6.9%). These results suggest that home ranges of Lutjanus decussatus can be regarded as territories against same-sized individuals, but not different-sized individuals. The usefulness of the fish tracking by snorkeling using a portable GPS receiver for home range size estimation and the function of the overlapping territory of the species are discussed.     

Enhanced degradation of carbazole and 2,3-dichlorodibenzo-p-dioxin in soils by Pseudomonas resinovorans strain CA10

We studied the degradation of carbazole (CAR) and 2,3-dichlorodibenzo-p-dioxin (2,3-DCDD) in soils inoculated with carbazole- and dioxin-degrader Pseudomonas resinovorans strain CA10. By using Tn5-based transposon delivery systems, this bacterium was chromosomally marked with a tandem green fluorescent protein (gfp) gene. Real-time competitive PCR and direct counting using the (gfp) marker were employed to monitor the total number of carbazole 1,9a-dioxygenase gene (carAa) and survival of CA10 cells in the soil and soil slurry microcosms. Bioaugmentation studies indicated that the survival of the marked CA10 cells in soil microcosms was strongly influenced by pH and organic matter. While the number of the marked CA10 cells decreased rapidly in pH 6 with low organic matter, a high cell density was maintained in pH 7.3 with 2.5% organic matters up to 21 days after inoculation. In pH 7.3 soil, the period needed for complete degradation of CAR (100 microg kg(-1)) was markedly shortened from 21 to 7 days by the inoculation with the CA10 cells. Single inoculation of CA10 cells into the soil slurry system of 2,3-DCDD-contaminated soil enhanced the degradation of 2,3-DCDD from 25.0% to 37.0%. In this system, the population density of CA10 cells and the total number of carAa gene were maintained up to 14 days after inoculation. By repeated inoculation (every 2 days) with CA10 cells each at a density of 10(9) CFU g(-1) of soil, almost all of the 2,3-DCDD (1 microg kg(-1)) was degraded within 14 days. Results of these experiments suggest that P. resinovorans strain CA10 may be an important resource for bioremediation of CAR and chlorinated dibenzo-p-dioxin in contaminated soils.     

Comparison of polybrominated diphenyl ethers in fish, vegetables, and meats and levels in human milk of nursing women in Japan

At present, little is known about the occurrence of polybrominated diphenyl ethers (PBDEs) in fish and food products sold in Japan. To investigate whether human exposure to PBDEs through the diet is significant, the concentrations of PBDEs were determined in fish and in meat and vegetables sold in two food markets in the city of Hirakata, Osaka prefecture. The concentrations of PBDEs in the breast milk of 12 primiparae nursing women at one month after delivery also were determined to ascertain the relationship between the levels found in the diet and levels in humans. sigma PBDE concentrations ranged between 21 and 1650 pg/g fresh weight in the edible tissues of five species of fish and one shellfish species. The highest concentrations were measured in yellow-fin tuna, followed by short-necked clam, salmon, yellowtail, mackerel and young yellowtail. Interestingly, sigma PBDE concentrations were not statistically significantly different in two cultured mackerel samples from Japan and mackerel collected from northern European waters. sigma PBDE concentrations in beef, pork and chicken meat (ranging between 6.25 and 63.6 pg/g fresh weight) and in three different vegetables (ranging between 38.4 and 134 pg/g fresh weight) were significantly lower than the concentrations in fish. In human milk, sigma PBDE concentrations ranged between 668 and 2840 pg/g lipid basis, which is comparable to the levels in populations of nursing women reported in Sweden and elsewhere. There was a strong positive relationship between PBDE concentrations in human milk and dietary intake of fish and shellfish, which was established in the women from responses to a questionaire on food consumption habits. The results of this study of food products commonly consumed in Japan and the levels found in nursing women raise a concern about low level PBDE contamination of fish and other foods intended for human consumption.     

Elemental composition of a tusk of a dugong, Dugong dugon, from Exmouth, Western Australia

Element analysis of the annual increments in a longitudinal section from the tusk of a female dugong Dugong dugon (Müller) from Exmouth, Western Australia, was carried out by X-ray fluorescence-imaging, inductively coupled plasma-atomic emission spectrometry (ICP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS). Nine elements (Ba, Ca, Fe, Li, Mg, Na, P, Sr and Zn) were present in concentrations amenable to determination by these techniques. Most elements revealed both long-term trends and shorter, year-to-year, variations. For example, sodium concentrations increased from 0.55 to 0.72% with the age of the dugong. Strontium concentrations (mean 0.17%) were closely correlated (r = 0.86) with those of barium (mean 4.5 mg kg⁻¹). Zinc concentrations increased from ∼70 to 170 mg kg⁻¹ with dugong age, but also showed shorter-term fluctuations of ∼30 mg kg⁻¹ that were correlated (r = 0.41) with mean annual Fremantle sea level (a measure of the Southern Oscillation Index and strength of the Leeuwin Current). The concentrations of the elements and correlations with year and between pairs of elements are discussed. Received: 10 January 1997 / Accepted: 21 April 1997     

Evaluation of metals in the residue of paper sludge after recovery of pulp components using an ionic liquid

The quantity of sludge produced by the paper industry in Japan in 2011 was estimated to be 27.91 million tons wet weight. This amount is the third largest among all industrial wastes. To explore ways of reusing recovered paper pulp and safely disposing of the residue, we investigated the distribution of metals in the process of recovery of pulp from two types of paper sludge using an ionic liquid. 32 and 46 % of pulp from paper sludge A and B was recovered using ionic liquid, respectively; the resultant weight reduction of the solid mass was comparable to that of incineration. There were virtually no heavy metals but aluminum in the recovered pulp, which makes its reuse viable at present. The characteristics of the metals in the residues differed according to the treatment used and properties of the paper sludge. Copper accounted for ~10 % in the ionic liquid used for recovery of pulp from the paper sludges. This suggests that [bmIm]Cl has the potential to dissolve a specific amount of copper compared to other metals.